A motor capacitor should only be investigated in designs that include one. A humming motor that won't start may also be caused by a mechanical blockage, power supply or motor fault, so this alone doesn't justify replacing the capacitor.
Don't confuse components that look similar
The start or run capacitor is part of a particular design. The mains input filter and capacitors on a control board or electronic drive serve other purposes. A dual capacitor assembly should not be treated as a simple component with spare connections.
First identify the motor type. In a twin-tub washer that won't spin, the fact that one section works does not establish the electrical condition of the other.
What a valid check requires
The technician must have the circuit diagram, specifications, and a procedure for isolation and safe discharge. Unplugging the appliance does not prove that a capacitor has lost all its charge. Do not short its terminals or improvise a discharge method.
Measurements must be interpreted against the component limits and the specified method. Appearance alone does not rule out a fault, and a single reading does not resolve a possible blockage accompanied by humming.
How to select a replacement
The capacitance, duty type, required voltage rating, connections and mounting of the compatible partmust be matched. Don't choose an approximate capacitance or increase the value in an attempt to improve starting.
After replacement, the complete circuit should be checked for correct operation and the enclosure refitted before validation. Live electrical testing is not part of a general household check.
Record the full assembly part number and its application to the model: a partial marking does not necessarily identify an equivalent capacitor.
View all articles in Washing machine component diagnosis and repair
