Miele TwinDos does not recognise a cartridge

On the Miele W2 generation, a TwinDos cartridge may not be recognised if the barcode read by the appliance is missing. Check the generation before following this procedure.

Recognition before consumption

The manufacturer's documentation refers specifically to W2. If the cartridge is accepted but not used up, that is a different issue; do not alter its label to try to change the dispensing amount.

Visually check the newly inserted cartridge and whether it is compatible with your washing machine system. Keep the packaging and note the exact message shown on the display. An illegible or missing code does not mean that the machine's reader is faulty.

Set the product reference on a compatible W2

The official help instructions let you go to Settings, Appliance functions and TwinDos; select the compartment and the reference for medium soiling, then enter the dispensing amount. This amount is taken from the packaging for the load and reference water hardness specified for the model, not from a generic figure for all detergents.

If your display does not match these steps, consult the manual for the relevant generation. If recognition fails repeatedly, contact Miele with the model and cartridge details. Do not tamper with labels or force the cartridges into place.

Setting a reference dose does not authorise you to use an incompatible cartridge.

View all articles in Miele washing machine error codes and alerts