Miele error F10: restricted water inlet

On the documented Miele models, F10 indicates that the water inlet is blocked or restricted. Check the tap, hose and accessible inlet filter before requesting a diagnosis.

If the fault started after the water was turned off

The manufacturer’s documentation recommends finishing the programme, turning on the tap and selecting the cycle again if that was the cause. Also check whether there is a water outage at your property. An open tap alone does not guarantee that enough water is reaching the appliance.

Inlet hose and filter

Look for tight bends or kinks. If the hose is damaged, do not straighten it as a permanent repair. The manual specifies when it must be replaced and which connection is suitable.

Before cleaning a user-accessible inlet filter, turn off the tap and prepare to disconnect it as directed for your model. Keep the seal and mesh, and put them back after cleaning. Slowly turn the tap back on and check that the connection is watertight. See water inlet filters for guidance on preparing for the task.

If the water supply is low, compare the conditions with the manual and contact the person responsible for the installation. If F10 returns when water is available and the accessible water path is clear, request a service call. F11 relates to drainage: do not open a pump filter just because F10 appears.

Note whether the problem started after an outage, moving the appliance or changing the water connection.

View all articles in Miele washing machine error codes and alerts