F20 or Heating fault on Miele: heating problem

F20 or Heating fault on Miele affects heating. The Thermostop wait can pause the timer until the set temperature is reached, but a persistent error needs to be checked.

Timer stopped or fault displayed

The manufacturer's documentation explains that Thermostop keeps the machine waiting when the programme temperature has not yet been reached; the time starts counting down again once it is reached. Note whether only the timer stops or F20/Heating fault is explicitly displayed.

Record the programme, selected temperature and stage at which it stops. The feel of the glass or the final temperature of the clothes alone does not show how the water heated during the wash.

A limited reset

For the technical fault, the support information consulted advises disconnecting the appliance from the power supply, waiting at least two minutes and then selecting the programme again. Do this only when the power connection is dry and safe to access, and check that the procedure applies to your model's manual.

If the warning returns, stop trying to restart it and arrange a service. Don't switch to cold washes to keep using an appliance with a persistent error, and don't take internal measurements or bypass thermostats. The guide to electricity and heating can help you describe related symptoms.

The diagnosis should confirm the cause of the heating fault; F20 does not mean that a specific heating element must be replaced.

View all articles in Miele washing machine error codes and alerts