Err5 indicates that a full fill is not detected in the documented Haier washer-dryers. Check the water supply and connections before attributing it to a valve or sensor.
This association comes from the Haier Appliances table. The fact that another series uses E4 for a similar issue does not mean you should replace Err5 with E4 in your search.
Check your appliance's water inlet configuration
Check how many water connections the manual requires. Make sure the relevant taps are open and the hoses are not kinked. The dual water supply requirements for one product range do not apply to models designed for a single inlet.
If the appliance was recently installed, confirm that the hoses and shut-off devices are compatible. Do not remove a safety feature or change connections while the water is under pressure to increase the flow.
Clean the mesh filters according to the user procedure, with the water turned off and the power disconnected. If water enters but the expected level is not detected, note what happens and seek assistance. Do not add water to the drum or test the solenoid valve with the appliance open.
Once external conditions have been checked, repeated Err5 errors require diagnosis of the fill system on that platform.
View all articles in Haier washing machine error codes and alerts
