Err5 indicates that a complete fill is not detected in the documented Haier washer-dryers. Check the water supply and connections before attributing it to a valve or sensor.
This association comes from the Haier Appliances table. The fact that another series uses E4 for a similar issue does not mean you should replace Err5 with E4 in your search.
Check your appliance's water inlet configuration
Check how many water inlets the manual requires. Make sure the corresponding taps are open and the hoses are not kinked. The dual water supply requirements for one product family do not apply to models designed with a single inlet.
If the installation is recent, confirm that the hoses and shutoff devices are compatible. Do not remove a safety feature or change connections while the water is pressurized to increase the flow.
Clean the screens according to the user procedure, with the water turned off and the power disconnected. If water enters but the expected level is not detected, note what happens and request service. Do not add water to the drum or test the inlet valve with the appliance open.
Once external conditions have been checked, a recurring Err5 requires diagnosis of the fill system on that platform.
