Err5 error on Haier washing machines: full fill not detected

Err5 indicates that a full fill has not been detected in the documented Haier washer-dryers. Check the water supply and connections before attributing it to a valve or sensor.

The association comes from the Haier Appliances table. The fact that another series uses E4 for a similar requirement does not mean you should replace Err5 with E4 in your search.

Check your appliance’s water inlet configuration

Check how many water inlets the manual specifies. Make sure the relevant taps are open and that the hoses are not kinked. The dual water supply requirements of one product family do not apply to models designed for a single inlet.

If the appliance has been installed recently, check that the hoses and shut-off devices are compatible. Do not remove a safety feature or change connections while the water is under pressure to increase the flow.

Clean the filters in accordance with the user procedure, with the water supply turned off and the appliance disconnected from the power supply. If water enters but the expected level is not detected, note what happens and seek assistance. Do not add water to the drum or test the solenoid valve with the appliance open.

Once the external conditions have been checked, a recurring Err5 requires diagnosis of the filling system on that platform.

View all articles in Haier washing machine error codes and warnings