Err5 indicates that a full fill is not detected in the documented Haier washer-dryers. Check the water supply and connections before attributing it to a valve or sensor.
This association comes from the Haier Appliances table. The fact that another series uses E4 for a similar requirement does not mean you should replace Err5 with E4 in your search.
Check your appliance’s water inlet configuration
Check how many water connections the manual requires. Make sure the corresponding taps are open and the hoses are not kinked. The dual water supply requirements of one product family do not apply to models designed with a single inlet.
If the installation is recent, confirm that the hoses and shut-off devices are compatible. Do not remove a safety feature or change connections while the water is pressurised to increase the flow.
Clean the filters in accordance with the user procedure, with the water supply turned off and the appliance disconnected from the power supply. If water enters but the expected level is not detected, note what happens and request assistance. Do not add water to the drum or test the solenoid valve with the appliance open.
Once the external conditions have been checked, a recurring Err5 requires a diagnosis of the filling system on that platform.
View all articles in Haier washing machine error codes and alerts
