E2 means the Haier washer-dryer cannot confirm that the door is locked, according to the table consulted. Err2 relates to drainage; the two codes should not be confused.
The Haier Appliances documentation distinguishes between the two messages. The table lists a 20-second attempt to lock the door on those washer-dryers; do not use that timeframe to diagnose another Haier model without its manual.
A closed door and a locked door are different states
If the door can be opened and the drum is stationary, check for garments caught across the seal, excessive pressure from the load, and visible damage to the latch. Close the door gently. If the panel still does not confirm that it is locked, do not hold the door shut to try to authorise the cycle to start.
If there is water or heat inside, respect the door lock and do not pull the handle. Cutting the power will not necessarily unlock it.
If the area around the door is clear and E2 appears again, have the locking system checked. The display does not identify which component needs replacing or authorise bypassing the safety lock.
Note whether E2 appears before filling or after an interruption; this will help the service team locate the lock check.
View all articles in Haier washing machine error codes and alerts
