Err1 indicates that the door is not closed on the documented Haier washer-dryers. Keep the prefix: E1 without Err refers to drainage in the same table.
This distinction is listed in the Haier Appliances washer-dryer table. Check the model before applying the code mapping.
Check what is preventing the door from closing
Once movement has stopped and the door is unlocked, move any clothing caught between the edge and the seal. Check whether the load is pushing the door from inside. Close it normally, without slamming it or keeping pressure on the latch.
If you see a damaged handle or latch, stop trying. A fully closed mechanical latch does not, by itself, confirm the electrical detection needed to start the machine.
If the warning appears during a cycle with water in the machine, do not force the door open to repeat the inspection. Check the model's recovery instructions and seek assistance if Err1 returns with the area clear. Do not bypass the door switch.
Note whether the appliance started or whether Err1 appeared on the first attempt; include a photo that preserves the prefix.
View all articles in Haier washing machine error codes and alerts
