Err2 error in Haier washing machines: the washer-dryer won't drain

Err2 indicates a drainage issue on the Haier washer-dryer models in the table consulted. E2, without Err, relates to the door lock and should be interpreted separately.

The Haier Appliances documentation points to the drain and filter for Err2. Access points should match the manual for the installed model.

If water is trapped, check the outlet first

Check whether the external hose is kinked or pushed too far into the drain. An unsuitable connection can make draining difficult; adjust the setup according to the manual, without removing appliance fixings by trial and error.

If the appliance has a filter that users can access, stop and disconnect the washer-dryer and let the water cool. Prepare for residual water drainage as instructed before loosening the filter. Opening it suddenly with the drum full can release a lot of water.

If the hose and authorised filter are clear and Err2 appears again, arrange an inspection of the circuit. Hearing the pump does not prove there is sufficient flow, and the alarm alone is not enough to conclude that the pump or control board is faulty.

When contacting support, specify whether the appliance did not drain at all or whether water remained after a partial drain.

View all articles in Haier washing machine error codes and alerts