Err1 error in Haier washers: door not closed

Err1 indicates that the door is not closed on the Haier washer-dryers documented here. Keep in mind that Err: E1 without that prefix refers to draining in the same table.

This distinction is listed in the Haier Appliances washer-dryer table. Confirm the model before applying the code match.

Check what is preventing the door from closing

With the machine stopped and the door unlocked, move any items caught between the edge and the seal out of the way. Check whether the load is pushing the door from inside. Close it normally, without slamming it or applying continuous pressure to the latch.

If you see a damaged handle or latch, stop trying. A fully closed mechanical latch does not, by itself, confirm the electrical detection required to start.

If the alert appears during a cycle with water in the machine, do not force the door open to repeat the inspection. Check the model’s recovery instructions and request service if Err1 returns once the area is clear. Do not bypass the door switch.

Note whether the appliance started or whether Err1 appeared on the first attempt; include a photo that shows the prefix.

View all articles in Haier washer error codes and alerts