Err1 error in Haier washing machines: door not closed

Err1 indicates that the door is not closed on the Haier washer-dryers covered in the documentation. Note that Err: E1 without this prefix refers to drainage in the same table.

This distinction is listed in the Haier Appliances table for washer-dryers. Check the model before applying the code mapping.

Check what is preventing the door from closing

Once the machine has stopped and the door is unlocked, move aside any clothes caught between the edge and the seal. Check whether the load is pushing the door from inside. Close it normally, without slamming it or applying continuous pressure to the latch.

If you see a damaged handle or latch, stop trying. A door that closes fully mechanically does not, by itself, confirm the electrical detection needed to start the machine.

If the alert appears during a cycle with water in the machine, do not force the door open to repeat the inspection. Check the model's recovery instructions and request assistance if Err1 appears again after the area is clear. Do not bypass the door switch.

Note whether the machine started or whether Err1 appeared on the very first attempt; include a photo that shows the prefix.

View all articles in Haier washing machine error codes and alerts