Bosch error E17 or F17: water inlet time exceeded

E17 or F17 on a Bosch indicates that the water supply time has been exceeded. Open and check the tap; if the warning continues despite the water supply being available, request assistance.

Distinguish between a water outage and a persistent fault

The manufacturer's documentation confirms the E17/F17 code pair. If the problem started when the appliance was installed or after a holiday, check that the washing machine's tap has not been left closed. If there is no water elsewhere in your home either, wait until the supply is restored before starting a new programme.

With the tap open, note whether you cannot hear water entering or whether it starts filling and then stops. Do not open the casing or assume that the warning is directly caused by the solenoid valve.

Further checks require the E-Nr

The permitted pressure, cleaning of filters and recovery procedure are covered in the installation and operating manual for your model. Do not use a flow rate, height or button sequence from another Bosch model. The guide to slow or no filling can help you organise your observations without assuming a part has failed.

If the tap is open and your household water supply is working but E17/F17 appears again, provide the E-Nr and request a diagnosis. Do not add another code, such as E29, to this process without specific confirmation.

Include the complete code in your assistance request, including its initial letter.

View all articles in Bosch washing machine error codes and warnings