Bosch documents E33 as the detection of excessive foam in compatible washing machines. First check the product and dosage, and confirm the E-Nr.
Adjust for the actual wash
The manufacturer's documentation recommends reducing the dosage, especially with soft water or lightly soiled clothes. Also check the product's concentration and the amount of laundry: don't use a full-load measure for every wash.
Count all products that may come into contact with the laundry, including additives and pre-treatments. If the alert appeared after changing detergent, check the dosage chart on the new packaging rather than keeping the previous dose.
Cycle recovery
Check whether the machine runs additional rinse cycles, and let the routine in the manual finish if there are no leaks. Don't add anti-foam mixtures or more detergent to complete the programme. To adjust future loads, check dosage by load, soil level and water hardness.
If E33 recurs with the dosage corrected, or occurs alongside water remaining in the machine, report both conditions to the service team. A third-party list that labels E33 as a pressure-switch fault does not replace the interpretation in the manual for your machine platform.
Note the product and amount before changing them: this helps assess whether the adjustment changes how often the alert recurs.
View all articles in Bosch washing machine error codes and warnings
