E17 or F17 on a Bosch indicates that the water supply time has been exceeded. Open and check the tap; if the code persists while water is available, request service.
Distinguish a water outage from a persistent fault
The manufacturer’s documentation confirms the E17/F17 code pair. If the problem started when the appliance was installed or after a holiday, check that the washing machine’s tap wasn’t left closed. If there’s also no water in your home, wait for the supply to be restored before starting a new programme.
With the tap open, note whether you can’t hear water entering or whether the machine starts filling and then stops. Don’t open the casing or assume the solenoid valve is at fault.
Additional checks require the E-Nr
The permitted pressure, filter-screen cleaning and recovery procedure are specific to the model’s installation and operating manual. Don’t use a flow rate, height or button sequence from another Bosch model. The guide to slow or no filling helps organize your observations without assuming a part has failed.
If the tap is open and the household water supply is working but E17/F17 appears again, provide the E-Nr and request a diagnosis. Don’t include another code, such as E29, in this troubleshooting process without specific confirmation.
Include the complete code in your service request, including its initial letter.
