Bosch Error E17 or F17: water inlet time exceeded

E17 or F17 on a Bosch indicates that the water inlet time has been exceeded. Open and check the tap; if the warning persists while the water supply is available, request assistance.

Distinguish a water outage from a persistent fault

The manufacturer's documentation confirms the E17/F17 pairing. If the problem started when you installed the appliance or after a holiday, check that the washing machine's tap has not been left closed. If there is no water in the home either, wait for the supply to be restored before starting a new programme.

With the tap open, note whether you can hear water entering or whether filling starts and then stops. Do not open the casing or assume that the warning is directly caused by the solenoid valve.

Further checks require the E-Nr

The permitted pressure, cleaning of the filters and recovery procedure are covered in the installation and user manual for your model. Do not use a flow rate, height or button sequence from another Bosch model. The guide to slow or no filling helps you organise your observations without assuming that a part has failed.

If the tap is open and the household water supply is working but E17/F17 appears again, provide the E-Nr and request a diagnosis. Do not add another code, such as E29, to this troubleshooting process unless it has been specifically confirmed.

Include the complete code in your assistance request, including the initial letter.

View all articles in Bosch washing machine error codes and alerts