E23/E23.1 and E24 on the ASKO WM76S indicate unlocking problems. Before retrieving the laundry, check that the programme has finished, the water has drained and the drum has stopped.
Door remains locked after the programme
The manufacturer's documentation distinguishes these alerts from initial locking faults. Note the decimal number and check whether a function that keeps the laundry in water was selected, or whether a stage still needs to finish. A normal safety delay is not, by itself, an error.
Resetting and opening the model
The manual recommends switching the machine off and on again for a release fault. If it happens again, contact support. Manual retrieval of laundry should follow the WM76S emergency opening instructions, with the machine disconnected, the water drained and safe conditions confirmed.
Do not insert a screwdriver next to the lock based on experience with another appliance. If you cannot check the water level, temperature or exact opening point, stop the procedure. Door, lid and safety lock explains the prerequisites.
If the door opens but the alert returns during another cycle, request a diagnosis. Retrieving the laundry does not prove that the unlocking system has been repaired.
Say whether the fault appeared at the end of a cycle, after cancelling, or following a power cut.
View all articles in ASKO washing machine error codes and warnings
