Remove pet hair left in the washing machine

Remove visible hair by hand before washing again. Check the drum, folds and any fitted catchers, as running several cycles does not guarantee that a build-up of fibres will be cleared from the system.

Find where it has collected

With the machine empty and switched off, check the drum surface, front gasket and any filters provided. Isolate the power supply before removing hair by hand. Do not put your hand into a drum that is turning or push hair into the openings.

Maytag includes removing loose hair and wiping the machine with a cloth in its guide to restoring the machine. Product instructions should not be applied to another model without checking compatibility.

Clean each area

  1. Wipe accessible surfaces with a compatible soft cloth and collect the hair for disposal. Clean the cloth outside the drum before continuing.
  2. If there is a front gasket, check its folds without stretching it or inserting tools.
  3. Empty and clean the lint catcher if one is fitted, following its opening mechanism.
  4. If the model's maintenance instructions say to do so, check the drain filter after safely draining any retained water.
  5. Once all the parts are back in place, run only a rinse or maintenance cycle that is approved for the machine, then check whether any visible hair remains.

Accessories and persistent build-up

Do not put floating catchers, sponges or other objects in the machine to collect hair without checking that they are compatible with it. A specially fitted filter has its own design and maintenance requirements; it cannot be replaced with a solution that simply fits inside the drum.

If the machine does not drain, or large amounts of hair reappear from an inaccessible area, stop running repeated cycles and arrange an inspection. Fibre removal does not require fragranced additives or vinegar by default.

If hair also remains on the clothes, see lint, hair and debris on clothes after washing. Removing fibres from textiles is a different task from clearing an empty machine.

Before loading a different wash, check that the catchers and folds are free of any visible build-up from the previous load.

View all articles in Cleaning the machine after accidental or heavy soiling