Remove pet hair left in the washing machine

Physically remove visible hair before washing again. Check the drum, folds and any filters, since running multiple cycles does not guarantee that fibre build-up will be cleared from the system.

Find where it has collected

With the machine empty and stopped, inspect the drum surface, front gasket and designated filters. Disconnect the power before removing hair by hand. Never reach into a spinning drum or push hair into the openings.

Maytag includes removing loose hair and wiping the machine with a cloth in its guide to getting the machine back in shape. Its product instructions should not be applied to another model without checking compatibility.

Clean one area at a time

  1. Wipe accessible surfaces with a compatible soft cloth and collect the hair for disposal. Clean the cloth outside the tub before continuing.
  2. If there is a front gasket, check its folds without stretching it or inserting tools.
  3. Empty and clean the lint trap if one is present, following its opening mechanism.
  4. If the model’s maintenance instructions call for it, check the drain filter after safely draining any trapped water.
  5. Once all parts are back in place, run only an authorized rinse or maintenance cycle, then check for any visible hair.

Accessories and persistent build-up

Do not put floating lint catchers, sponges or other objects in the machine to collect hair without confirming that they are compatible with the appliance. An installed specialty filter has its own design and maintenance requirements; it cannot be replaced with a solution that simply fits in the drum.

If the machine is not draining or large amounts of hair keep reappearing from an inaccessible area, stop running repeated cycles and arrange an inspection. Removing fibres does not normally require scented additives or vinegar.

If hair also remains on your clothes, see lint, hair and debris on clothes after washing. Removing fibres from textiles is a separate task from cleaning out an empty machine.

Before putting in another load, make sure there is no visible build-up from the previous load in the filters or folds.

View all articles in Clean the machine after accidental or heavy soiling