Cleaning the machine after accidental or heavy soiling

Cleaning the machine after accidental or heavy soiling

After accidental contamination, first identify what got into the machine. Remove accessible physical debris before running another cycle, but stop using the machine if fuels, solvents or another unsuitable substance may be present.

The type of residue determines what action to take

ResidueFirst stepSpecific guidance
Hair and fibresCollect from the surfaces and any collection points presentPet hair
Sand, mud or particlesDistinguish a dirty load from sediment in the water supplySand and mud
Paper or absorbent materialRemove scattered solids without trying to dissolve themPaper or an accidentally washed nappy
DyeIdentify the dye and its cleaning instructionsDye residue
Grease or an unknown chemicalIdentify the substance before switching on the machineGrease, oils and chemicals

Prepare an empty machine

Wait until the cycle has ended and the door is safely unlocked, then remove the load and inspect what is visible. If there has been a chemical incident, or there is a strong smell or fumes, do not open the machine for a close inspection: move away and follow the product's emergency instructions.

For residues that are safe to wash, keep the mechanisms stopped and isolate the power supply before cleaning by hand. Do not push accumulations into holes or the drain. Clean only the filters and parts that the manual allows you to open, and deal with any water before accessing a pump filter.

Treatment and checks afterwards

Remove material physically before running an authorised programme if there is anything to collect. A cleaner alone will not remove sand, hair or a foreign object. After cleaning, inspect the empty machine and check that no residue or product remains to be rinsed out before the next load.

If the machine does not drain, makes new noises or residue returns from an enclosed area, do not run repeated wash cycles to try to move it. Arrange an inspection and report what material entered the machine. Hazardous contamination is not resolved just because the drum looks clean.

Frequently Asked Questions

Should I clean the machine after every very dirty load?

Not necessarily with a full cleaning treatment. Check what remains in accessible areas and carry out the tasks required for the residue and the manual, especially if a different load will follow.

Is it better to remove visible residue before running another cycle?

Yes, if the residue is safe to handle and accessible. Collecting it prevents it from being sent through the system again. If a hazardous chemical is involved, the priority is to stop using the machine and obtain instructions.

Will an empty rinse cycle resolve every type of contamination?

No. It may flush away some types of residue, but it cannot guarantee the removal of solids, pigment or hazardous substances, nor does it confirm disinfection.

This check helps restore the machine using only its authorised maintenance procedures. Cleaning affected garments requires separate decisions.