
After accidental contamination, first identify what has got into the machine. Remove any accessible physical debris before running another cycle, but stop using the machine if there may be fuel, solvents or another unsuitable substance.
The type of residue determines what action to take
| Residue | First step | Specific approach |
|---|---|---|
| Hair and fibres | Collect them from the surfaces and any fitted collectors | Pet hair |
| Sand, mud or particles | Distinguish a dirty load from sediment in the water supply | Sand and mud |
| Paper or absorbent material | Remove scattered solids without trying to dissolve them | Paper or an accidentally washed nappy |
| Dye | Identify the dye and its cleaning instructions | Dye residue |
| Grease or an unknown chemical | Identify the substance before switching the machine on | Grease, oils and chemicals |
Prepare an empty machine
Wait until the cycle has finished and the door is safely unlocked, then remove the load and inspect what is visible. If there has been a chemical incident, or there is a strong smell or fumes, do not open the machine to inspect it closely: move away and follow the product’s emergency instructions.
For residues that are safe to wash, keep the mechanisms stopped and isolate the power supply before cleaning by hand. Do not push accumulations into holes or the drain. Only handle filters and parts that the manual says can be opened, and deal with any water before accessing a pump filter.
Treatment and subsequent checks
Remove physical material before running an approved programme if there is anything to collect. A cleaner will not, by itself, remove sand, hair or a foreign object. After cleaning, check the empty machine and make sure no residue or product remains to be rinsed away before the next load.
If the machine does not drain, makes new noises or residue returns from an enclosed area, do not run repeated washes to try to move it. Arrange an inspection and explain what material got into the machine. Hazardous contamination is not dealt with just because the drum looks clean.
Frequently Asked Questions
Should I clean the machine after every very dirty load?
Not necessarily with a full treatment. Check what remains in accessible areas and carry out the tasks required by the residue and the manual, especially if a different load will follow.
Is it better to remove visible residue before running another cycle?
Yes, if the residue is safe to handle and accessible. Collecting it prevents it from being sent back through the system. If there is a hazardous chemical, the priority is to stop using the machine and get instructions.
Will an empty rinse cycle deal with every type of contamination?
No. It may wash away some types of residue, but it cannot guarantee the removal of solids, pigmentation or hazardous substances, or confirm that the machine has been disinfected.
This check helps restore the machine within the scope of its authorised maintenance. Cleaning the affected garments requires separate decisions.




