Cleaning and maintaining a washer-dryer

A washer-dryer combines the maintenance required for washing with the care its design needs for drying. Identify the filters and access points in the manual: a pump filter and an air filter do different jobs.

Map out the two pathways

For washing, look for instructions covering the dispenser, door seal, drum and drain filter if there is an access point. For drying, check for lint filters, a fibre-flushing routine or heat-exchanger areas that the user can reach.

Some combination washer-dryers have a water-condensation circuit without a condenser that the owner can remove. Heat pump models may provide different access points. As a specific example, GE documents a multi-stage filtration assembly in the UltraFast Combo; that arrangement does not describe all washer-dryers.

Coordinate tasks without mixing up procedures

  1. Check the maintenance reminders and which section each one relates to.
  2. Wait for the drying cycle to finish and for the specified areas to cool before doing any manual work. Isolate the power supply if required for access.
  3. Clean the filters and lint in the air pathway using the method appropriate for the material; refit all parts.
  4. Run the washing-machine cleaning cycle as intended, separately from any garment programme.
  5. Check that the filters are seated correctly and that there is no visible debris before the next load.

If drying performance continues to worsen

A clean filter alone does not confirm that the drying system is working properly. Note whether the change occurs with every load, whether a warning appears and which task was performed. Cleaning can be a troubleshooting step; it is not a reason to open sealed ducts, the cabinet or the refrigerant circuit.

If the problem continues after authorised maintenance, follow the poor drying troubleshooting steps or arrange a service call. Do not adapt the disassembly procedure for a standalone dryer to a combination washer-dryer.

Keep two references in your routine: washing-machine cleaning and drying-system maintenance. Each may have different warnings and conditions.

View all articles in How to clean your washing machine by type