Calibrating a Samsung washing machine after installation or moving it

On Samsung models that include calibration, it adjusts the load-sensing reference. Run it with the drum empty and the machine level; it does not fix damaged parts or inadequate support.

Check the panel type before pressing any buttons

The Samsung Caribbean calibration guide distinguishes between these panels. Use a variant only if your model’s manual confirms that function and sequence:

Documented access by control-panel type
Panel in the guideEntering the modeStarting calibration
Front-load panel with Temperature and Delay EndSwitch off and on; hold both buttons for 3 seconds until Cb appearsPress and hold Start/Pause
Multi-control panel with Additional FunctionsSwitch off and on; hold that button for 3 seconds; select calibration using the dialConfirm with the indicated O button
Top-load panel with Wash Cycles and Delay EndWith the power on, hold both buttons for at least 3 secondsPress and hold Start/Pause
Top-load panel with Water Level and Delay EndHold both buttons for at least 3 secondsPress and hold Start/Pause

The drum performs calibration movements. Depending on the variant, completion may be indicated by 0 or a calibration-complete message. Follow your manual if the controls or indicators do not match.

If the process is interrupted or the function does not appear

Check that there are no clothes or objects inside and that levelling has been completed. Do not try button combinations from other panel types. Note the message and contact support if the process does not finish as documented.

Load sensing helps control the cycle; calibration does not repair a faulty suspension or sensors. Then follow the relevant installation test.

Matching button names are not enough: confirm that your model includes this calibration variant before running it.

View all articles in Starting up and setting up a washing machine