Calibrating a Samsung washer after installing or moving it

On Samsung models with a calibration function, calibration adjusts the load-sensing reference. Run it with the drum empty and the washer level; it does not fix damaged parts or an unsuitable support surface.

Confirm your control panel family before pressing

The Samsung Caribbean calibration guide distinguishes these panels. Use a procedure only if your model’s manual confirms that function and sequence:

Documented access by control family
Panel in the guideEnter the modeStart calibration
Front-load model with Temperature and Delay EndTurn the washer off and on; hold both buttons for 3 seconds until Cb appearsPress and hold Start/Pause
Multi-control panel with Additional FunctionsTurn the washer off and on; hold that button for 3 seconds, then select calibration with the dialConfirm using the indicated O button
Top-load model with Wash Cycles and Delay EndWith the washer powered on, hold both buttons for at least 3 secondsPress and hold Start/Pause
Top-load model with Water Level and Delay EndHold both buttons for at least 3 secondsPress and hold Start/Pause

The drum moves during calibration. Depending on the procedure, completion may be indicated by 0 or a calibration-complete message. Follow your manual if the controls or indicators don’t match.

If the process is interrupted or the function doesn’t appear

Make sure there are no clothes or objects inside and that levelling has been addressed. Don’t try button combinations for other panels. Keep a record of the message and contact support if the process doesn’t finish as documented.

Load sensing helps control the cycle; calibration won’t repair a faulty suspension system or sensors. Afterward, follow the applicable installation test.

Matching button names aren’t enough: confirm that your model includes this calibration procedure before running it.

View all articles in Starting up and setting up a washing machine