Clothes come out with holes, snags or tears

If holes or tears appear, compare their shape, location and recurrence. Do not test again with clothes if a sharp surface is visible or the damage keeps recurring without an identified cause.

Distinguishing tears, snags and weakened fabric

Check for pulled threads, abrasion, cuts or a fragile area that has opened up. Compare with existing wear on elbows, the crotch, seams or contact points. Damage noticed when taking clothes out may have started before washing.

Products can also affect the fabric. If there is colour loss next to the damage, see discolouration and chemical exposure, without assuming that every tear is caused by the drum.

Checks you can carry out

  1. Check the load's pockets and fastenings, including hook-and-loop fasteners, hooks and detached parts.
  2. Check the label, load size, programme and products used.
  3. With the appliance stopped and without accessing moving mechanisms, visually inspect accessible surfaces.
  4. If you see a sharp object or a damaged part, stop using the appliance and consult the technical diagnosis guide.

Do not run your hand along a suspicious edge, insert tools into gaps or dismantle the drum. Visual inspection alone is not a reason to replace parts based on a single hole.

Preparing subsequent loads

Correct the preparation of fastenings and clothes when you identify that cause. Use protective bags only for items that are already suitable for them; do not use them to continue washing with a damaged surface. If tears recur, note the affected clothes and programmes for the technical consultation.

If there is a sharp edge or repeated damage, stop using clothes to test the appliance and keep the information for diagnosis.

View all articles in Clothes don’t come out right: laundry residues, stains and damage