U12 error in Panasonic washing machines: door open or not closed

U12 indicates an open door in the Panasonic FR1 family. Check that the door is visibly closed when the machine allows you to open it; do not confuse this with a lockout due to water or temperature.

The FR1 table identifies this status for NA-V10FR1 and NA-S106FR1. A top-loading machine may require a different arrangement and procedure.

If the cycle does not start

Check that the laundry is inside the drum and is not caught in the door seal. See whether anything is preventing the door from reaching its closed position, and close it normally. Do not hit it or hold the latch down to try to start the programme.

If the door is already closed but U12 appears again, make a note of this. The message alone cannot distinguish a broken part from another failure to confirm that the door is closed.

If it appears during the programme

Pause the machine and respect its lockout. Water, heat or movement may prevent the door from opening, even if you want to check the edge. Do not force the handle or bypass the lock. If the area around the door is clear and the warning persists, request assistance and provide the model reference and the point in the cycle when it occurred.

When requesting help, distinguish between a door that does not fit properly and one that fits but is still detected as open.

View all articles in Panasonic washing machine error codes and warnings