U11 error in Panasonic washing machines: unable to drain water

U11 indicates a drainage failure in Panasonic FR1 and other documented washing machines. How you check the hose depends on whether the machine has a drain pump or uses gravity drainage.

The Panasonic FR1 table confirms U11 for the NA-V10FR1 and NA-S106FR1. For other machines, confirm the meaning of the code and the drainage setup before changing the installation.

Identify how the water drains

For pump drainage, follow the manual for the hose height and connection; lowering the hose without checking can cause siphoning. With gravity drainage, raising it like the hose on a front-loading machine can prevent water from flowing out. Do not use the two sets of instructions interchangeably.

With the machine switched off, check for kinks, compression and external blockages. If the manual allows you to clean a filter, first prepare to drain the water in a controlled manner, with the power supply isolated and the water cold. The door may remain locked because the water has not drained.

Do not force the door open or remove the filter while the water is hot. If U11 persists after the accessible checks, contact a service technician. Do not assume from the code alone that the pump needs replacing, especially if your model does not use one.

Tell the support team whether the machine is top- or front-loading, and share a view of the external hose route; this will help them check whether the installation matches that drainage setup.

View all articles in Panasonic washing machine error codes and warnings