On the Miele W2 generation, a TwinDos cartridge may not be recognised if the barcode read by the appliance is missing. Check the generation before following this procedure.
Recognition before consumption
The manufacturer's documentation refers specifically to W2. If the cartridge is accepted but its contents are not being used, the issue requires a different approach; do not alter its label in an attempt to change the dosage.
Visually check the newly installed cartridge and confirm that it is compatible with your washing machine system. Keep the packaging and note the exact message shown on the display. An illegible or missing barcode does not prove that the machine's reader is faulty.
Set up the product reference on a compatible W2 model
The official guidance allows you to go to Settings, Appliance functions and TwinDos; select the compartment and the medium-soil reference, then enter the dosage quantity. This quantity is taken from the packaging for the reference load and water hardness specified for the model, not from a general figure that applies to all detergents.
If your display does not follow this sequence, consult the manual for the relevant generation. If the cartridge is repeatedly not recognised, contact Miele with the model and cartridge details. Do not tamper with labels or force the cartridge into its compartment.
Setting a reference dosage does not authorise the use of an incompatible cartridge.
View all articles in Miele washing machine error codes and messages
