Hotpoint error F06: door lock fault

In the European Hotpoint catalogue, F06 indicates a door lock fault. Identify whether the door will not close, will not open, or is closed but prevents the appliance from starting.

If it will not close

The manufacturer's documentation recommends checking for visible obstructions around the lock. With the appliance stopped and the door opening normally, remove any trapped clothes and check whether the load is pressing against the door. Do not insert tools into the latch or hit the handle.

If it is closed but the cycle will not start

Note whether it attempts to lock, whether F06 appears immediately, and whether it has taken in water. A door that appears closed may not be detected as such. If there is no obstruction and the warning persists, arrange for an inspection.

If it will not open after the wash

Check whether the cycle has finished and whether water remains or the temperature is still high. Do not use a door-closing procedure for this opposite situation. The door and safety lock mechanism requires you to wait for the normal release and consult the manual before attempting any emergency opening.

Keep the model number and European platform details handy when asking for help; do not assume the same meaning applies to North American Hotpoint models. If the fault persists, the system needs to be diagnosed; do not bypass the safety lock.

Describe which of the three situations applies: it will not close, will not start, or will not unlock.

View all articles in Hotpoint washing machine error codes and warnings