Hotpoint Error F06: Door Lock Fault

In the European Hotpoint catalogue, F06 indicates a door lock fault. Determine whether the door won’t close, won’t open, or is closed but prevents the appliance from starting.

If it won’t close

The manufacturer’s documentation recommends checking the lock for visible obstructions. With the appliance stopped and the door opening normally, remove any trapped clothing and check whether the load is pressing against the door. Don’t insert tools into the latch or strike the handle.

If it’s closed but won’t start

Note whether it tries to lock, whether F06 appears immediately, and whether it has started to take in water. A door that appears closed may not be detected as closed. If the door is unobstructed and the warning persists, arrange for an inspection.

If it won’t open after the wash

Check whether the cycle has finished and whether water remains or the temperature is still high. Don’t apply a closing procedure to the opposite situation. The door and safety lock mechanism requires you to wait for the normal release and consult the manual before attempting any emergency opening.

Provide the model and European platform when requesting help; don’t assume the same meaning applies to North American Hotpoint models. If the fault persists, the system needs to be diagnosed; don’t bypass the safety lock.

Describe which of the three situations applies: won’t close, won’t start, or won’t unlock.

View all articles in Hotpoint washer error codes and alerts