
This Hotpoint index applies to the documented European platforms. Do not apply these codes to North American Hotpoint washing machines without confirmation from the manual.
Digital display and light arrangement
The official Hotpoint catalogue shows codes and reference panels. If the washing machine uses LEDs, note the specific lights and their pauses; counting flashes without identifying their positions can lead to a different code.
Water retained, door lock and top-loading drum
F05 points to a drainage blockage or pump problem. F06 relates to the door lock and may appear when the door will not open, close or start the programme. Although both can leave clothes trapped inside, the troubleshooting steps are not the same.
F16 is documented for the drum position on top-loading models. Distinguish between the outer lid and the drum flaps before describing which part is preventing access to the clothes.
Other warnings requiring service
F11 relates to the pump circuit in the catalogue; F07/F08 and certain heating warnings require assistance. F01 or F18 may accompany electronic faults and have a prescribed reset, but repeating it will not fix a persistent fault.
Limit checks to those permitted by the model's manual. Do not open panels, bypass door locks or try to measure circuits using a chart. For a washer-dryer, note whether the code appeared during washing or drying.
Frequently Asked Questions
Where can I find the full model number of my Hotpoint washing machine?
Look for the model and serial number on the identification plate, and check its manual to find where the plate is located. Copy the complete reference and keep the appliance's market in mind when using documentation from another country.
Does the same code mean the same thing on all its washing machines?
No. European and North American Hotpoint models may use different platforms. Also, F16 in this index applies only to the documented top-loading models.
How do I distinguish a normal warning from a fault?
Identify the panel and compare the sequence with the manual. A persistent fault code requires different steps from the normal delay before the door unlocks after a cycle.
Does clearing the code confirm that the problem is fixed?
No. Clearing the display does not confirm that a filter is clear or that the door lock is working properly. If the symptom continues, arrange an inspection.
What information should I give the service technician?
Provide the model and serial numbers, the code or a photo of the lights, and the loading type. Mention whether there is water inside, whether the door opens, and when the programme stopped progressing.
A similar panel or brand does not prove that the source platform is the same.




