Hotpoint top-loader error F16: drum position

On documented European Hotpoint top-loaders, F16 affects the drum locking position. If the drum is misaligned or jammed, request service without forcing it.

Outer lid and drum flaps

The manufacturer's documentation limits this warning to top-loaders. The lid on the casing provides access to flaps inside the drum; automatic positioning should leave them in an accessible area. These are not the same lock.

With the machine switched off, observe only what is visible through the normal access: whether the lid opens, whether the flaps are visible and whether the drum is out of position. Do not put your hand into a narrow gap or try to force a jammed drum to turn.

What to report if clothes are trapped inside

Provide the model, exact code, stage at which the error appeared, and whether the programme finished or water remained in the machine. This information helps the technician prepare for safe access without assuming that the sensor is necessarily the only part affected.

If the appliance is not a top-loader or the manual assigns F16 to another function, this interpretation does not apply. Check the Hotpoint index to identify the platform. Do not run repeated cycles in an attempt to position the drum using impacts or inertia.

The priority is to keep the mechanism intact so the clothes can be retrieved safely.

View all articles in Hotpoint washing machine error codes and warnings