In the European Hotpoint catalogue, F06 indicates a door lock fault. Check whether the door won’t lock, won’t open, or is closed but preventing the machine from starting.
If the door won’t lock
The manufacturer’s documentation recommends checking for visible obstructions in the lock. With the machine stopped and the door opening normally, remove any trapped clothing and check whether the load is pressing against the door. Don’t put tools into the latch or hit the handle.
If the door is closed but the machine won’t start
Note whether the machine tries to lock, whether F06 appears immediately, and whether it has taken in water. A door that looks closed may not be recognised as locked. If the area is clear and the warning persists, arrange an inspection.
If the door won’t open after the wash
Check whether the cycle has finished and whether water remains or the temperature is high. Don’t apply a locking procedure to the opposite situation. The door and safety lock mechanism requires you to wait for it to release normally and consult the manual before attempting any emergency opening.
Have the model and European platform details ready when requesting help; don’t assume this means the same thing on a North American Hotpoint. If the fault persists, the system needs to be diagnosed; this does not mean you should bypass the safety lock.
Describe which of the three situations applies: the door won’t lock, the machine won’t start, or the door won’t unlock.
View all articles in Hotpoint washing machine error codes and warnings
