Hotpoint error F06: door lock fault

In the European Hotpoint catalogue, F06 indicates a door lock fault. Find out whether the door will not close, will not open, or is closed but prevents the appliance from starting.

If it will not close

The manufacturer’s documentation recommends checking for visible obstructions around the lock. With the appliance stopped and the door opening normally, remove any trapped laundry and check whether the load is pressing against the door. Do not insert tools into the catch or strike the handle.

If it is closed but will not start

Note whether it attempts to lock, whether F06 appears immediately and whether it has taken in any water. A door that looks closed may not be recognised as such. If it is unobstructed and the warning persists, arrange for it to be checked.

If it will not open after the wash

Check whether the cycle has finished and whether any water remains or the temperature is still high. Do not apply a closing procedure to this opposite situation. The door and safety lock mechanism requires you to wait for it to release normally and consult the manual before attempting any emergency opening.

Provide the model and European platform when requesting help; do not assume the meaning is the same for North American Hotpoint models. If the fault persists, the system needs to be diagnosed; do not bypass the safety lock.

Describe which of the three situations applies: it will not close, will not start, or will not unlock.

View all articles in Hotpoint washing machine error codes and warnings