Hotpoint washing machine error codes and warnings

Hotpoint washing machine error codes and warnings

This Hotpoint index covers documented European platforms. Do not apply its codes to North American Hotpoint washing machines without confirmation from the manual.

Digital display and indicator light layout

The official Hotpoint catalogue shows codes and reference panels. If the washing machine uses LEDs, note the specific lights and their pauses; counting flashes without identifying their position may lead to a different code.

Trapped water, door lock and top-load drum

F05 indicates a drainage blockage or pump problem. F06 relates to the door lock and may appear when the door will not open or close, or the programme will not start. Although both can leave laundry trapped inside, their troubleshooting steps are different.

F16 is documented for the drum position on top-load models. Distinguish between the outer lid and the drum flaps before describing which part is preventing access to the laundry.

Other warnings requiring a service visit

F11 relates to the pump circuit in the catalogue; F07/F08 and certain heating warnings require assistance. F01 or F18 may accompany electronic faults and have a specified reset procedure, but repeating it will not fix a persistent fault.

Limit checks to those permitted by the model's manual. Do not open panels, bypass door locks or attempt to measure circuits using a table. For a washer-dryer, note whether the code appeared during washing or drying.

Frequently Asked Questions

Where can I find the full model number of my Hotpoint washing machine?

Look for the model and serial number on the rating plate, and check the manual to find its location. Copy the complete reference and note the appliance's market of sale when using documentation from another country.

Does the same code mean the same thing on all its washing machines?

No. European and North American Hotpoint models may use different platforms. In addition, F16 in this index applies only to the documented top-load models.

How can I tell a normal warning from a fault?

Identify the control panel and compare the sequence with the manual. A persistent fault code calls for different troubleshooting from the normal delay before the door unlocks at the end of a cycle.

Does clearing the code confirm that the problem has been fixed?

No. Clearing the display does not confirm that a filter is clear or that the door lock is working properly. If the symptom continues, arrange for the appliance to be checked.

What information should I give the service engineer?

Provide the model and serial number, the code or a photo of the lights, and the type of loading. Say whether there is water inside, whether the door opens, and when the programme stopped progressing.

A similar-looking panel or brand does not prove that it uses the same platform as the source.