If there is excessive foam, do not add detergent or anti-foam remedies. Check whether the appliance is running a programmed routine; if water is leaking out or there is an electrical risk, prioritise stopping it safely.
Foam contained and cycle running
Check the full message on the display. Some appliances extend the rinse cycle or limit the spin to manage foam. Whirlpool documents this behaviour in its front-loading machines; the alerts and instructions in its manuals should not be applied to another machine.
Let the recovery process finish when the manual says to do so. If it asks you to take action, follow the steps given. Do not force the door open, open the filter during the cycle, or add vinegar, oil or an improvised defoamer.
Overflow or water outside the appliance
If you can stop it using a dry control without exposing yourself to water, do so. Do not touch wet plugs or connections. If you cannot safely isolate the appliance, keep your distance and seek help. If water is coming out of the dispenser, check water coming out of the detergent drawer, not just the detergent dose.
Work out the dose
- Identify the product and its concentration, including whether it is compatible with HE or low-suds machines.
- Include any additives or pre-treatment applied to the clothes.
- Check whether automatic dosing was left on as well as a manual dose being added.
- Compare the amount used with the load size and the instructions on the pack.
When the cycle is complete, check whether the clothes need the compatible rinse recommended by the manufacturer. To prevent this happening again, adjust the dosage you identified as the cause, without arbitrarily reducing it so much that the load is left unwashed.
Before your next wash, identify what caused the excessive or incompatible dose so you can avoid repeating the incident.
View all articles in Detergents, dosing and laundry additives
