When to disinfect a washing machine and how to check the method

Disinfecting a washing machine requires a specific need and a method approved for the appliance. A common odour or a hot programme alone does not show that disinfection is necessary or that the desired effectiveness will be achieved.

Start by identifying what happened

Describe the residue or contamination, which surfaces it reached, and whether the appliance remains safe to use. Do not connect a machine affected by flooding to disinfect it: it needs a technical assessment first.

The CDC distinguish between cleaning and disinfection and recommend removing dirt before disinfecting surfaces. Their household guidance is not a validated formula for every internal washing-machine circuit.

Check these requirements against both sets of instructions

DocumentWhat it must confirm
Appliance manualCompatible surfaces, permitted product, application method and programme
Disinfectant labelIntended use, stated purpose, required concentration or dose, and contact time
Treatment instructionsPreparation, personal protection, and final rinsing or removal

If the label only describes a worktop, do not assume that a cycle will dilute and apply the product correctly inside the drum. Nor should you calculate a disinfection time from the temperature shown on the selector: it does not tell you the actual exposure of each surface.

Application and outcome

Remove visible dirt using the authorised access points, then complete the validated procedure without combining substances. If the permitted product is chlorine-based, check the conditions for using bleach and the safety of cleaning products.

When finished, check that the process was completed and that no product residue remains to be rinsed away. A surface with no odour or stains is not a microbiological measurement. If the case requires documented health-related efficacy, follow the applicable protocol and consult a suitably qualified professional.

For recurring damp stains with no identified contamination incident, the mould and deposits guide can help you decide how to clean and investigate the cause.

Do not turn general advice for surfaces into a treatment for the whole washing machine. The method must be appropriate for the specific use and appliance.

View all articles in Bad smell from the washing machine: identify the source and get rid of it