Heat can come from an internal heating element, an external hot-water supply, or both. Some washing machines operate at the available water temperature and do not have a heater.
How energy reaches the wash tub
An internal heating element converts electrical energy into heat within the intended circuit. With a hot-water supply, some of the energy has already been used before the water reaches the machine. Models with dual inlets can mix the supplies according to their valves and the selected program.
The hot and cold water connection must match the machine’s design. Connecting hot water to an inlet that is not approved for it can affect washing conditions and components; it is not a universal way to save electricity.
What the temperature sensor does
The sensor reports the temperature at its measurement point. The control system decides when to heat or mix water, subject to conditions such as the water level, cycle phase and safety limits. A thermostat or limiter may serve another function, but not all appliances use the same components.
The selected temperature does not necessarily describe the entire temperature curve: it may be a reference point, a maximum or part of the program profile. Heating and rinsing may take place under different conditions. Touching the glass at the end does not measure what happened during the wash.
How to interpret energy use and performance
When calculating energy per cycle, distinguish the appliance’s electricity use from the energy used to supply external hot water. The steam function is also not the same as keeping all the water in the tub hot.
If the temperature seems incorrect, start by identifying the system and program. Testing a heating element requires a different level of diagnosis and documentation.
To interpret a temperature, identify its source, the measurement point and the phase it corresponds to.
View all articles in How a washing machine works: systems and components
