The spider, or support, connects and supports the inner drum in designs that use one. An off-centre position may warrant inspection, but does not by itself confirm a breakage.
Distinguishing support from suspension
The suspension moves the tub assembly relative to the casing. The supports and shaft maintain the inner drum’s position in relation to that assembly. Any visible play should describe which part is moving.
Irregular rubbing against the seal, a dropped position or localised play may be associated with damage to the spider, shaft or bearings. Do not run a spin cycle to tell them apart if the drum is already touching other parts.
What the inspection needs to cover
The support’s integrity, the shaft surface, joints, corrosion and the condition of associated components should be assessed. How far the machine needs to be dismantled depends on the platform, and equipment is needed to handle the assembly securely.
The cause of corrosion cannot automatically be inferred from the detergent used. An external inspection will not reveal all the damage that may become apparent during dismantling.
Replacement part and repair scope
Check whether the parts list includes a separate spider or the complete drum. The quote should make clear whether it includes the shaft, bearings, seal and any affected components. This difference may change the decision to repair.
Do not improvise welds, reinforcements or fasteners to restore a part that is subject to rotation. The solution must preserve alignment, strength and balance in accordance with a documented repair procedure.
A repaired or replaced support should be checked along with the associated bearings and seals, not just for the disappearance of the original rubbing.
View all articles in Washing machine component diagnosis and repair
