Miele TwinDos Doesn’t Recognize a Cartridge

On the Miele W2 generation, a TwinDos cartridge may not be recognized if the barcode the appliance reads is missing. Check the generation before following this procedure.

Recognition comes before dispensing

The manufacturer’s documentation specifically refers to W2. If the cartridge is accepted but the detergent isn’t being dispensed, that’s a different issue; don’t alter its label to try to change the dosage.

Visually inspect the newly installed cartridge and check whether it’s compatible with your washer’s system. Keep the packaging and note the exact message on the display. An unreadable or missing code doesn’t mean the machine’s reader is faulty.

Set up the reference on a compatible W2

The official help instructions say to go to Settings, Appliance functions and TwinDos; select the compartment and the medium-soiling reference, then enter the dispensing quantity. Use the quantity on the packaging for the reference load size and water hardness specified for your model, not a generic figure for all detergents.

If your display doesn’t match those steps, consult the manual for the corresponding generation. If recognition problems keep recurring, contact Miele with your model and cartridge details. Don’t tamper with labels or force the cartridge into its housing.

Setting a reference dosage does not authorize using an incompatible cartridge.

View all articles in Miele washer error codes and messages