Miele Error F35 or Door Release: The Lock Will Not Release

F35 or Door Release means that the lock will not release on compatible Miele models. It may affect the door or the drum of a top-loader; do not force it to get the laundry out.

Distinguishing normal waiting from a release error

The manufacturer's documentation identifies this as an inability to unlock. Check whether the programme has finished, whether water is trapped inside and whether the drum has come to a complete stop. Do not treat every brief delay in opening as F35 if the control panel does not show it.

Permitted recovery steps and access to the laundry

The support information consulted recommends disconnecting the appliance from the mains for at least two minutes and then switching it back on. Do this only using a dry, accessible socket, and follow the procedure confirmed for your model.

If the message continues, contact support. To retrieve laundry, Miele refers to the emergency release procedure in the appliance instructions: its location and mechanism vary. Before using it, ensure that the specified conditions for water, temperature, disconnection and movement are met. If you cannot verify them, wait for a technician.

The guide to doors and locks explains these preliminary checks. Do not insert tools near the latch by following an image of a different washing machine.

Mention whether F35 appeared at the end of a programme, after cancelling it or following a power cut.

View all articles in Miele washing machine error codes and messages