F35 or Door release error on Miele: the door lock won’t release

F35 or Door release means the door lock won’t release on compatible Miele models. It may affect the door or the drum on a top-load washer; don’t force it to get clothes out.

Distinguish normal waiting from a release error

The manufacturer’s documentation identifies an inability to unlock. Check whether the cycle has finished, whether water is still inside, and whether the drum has come to a complete stop. Don’t interpret every brief delay in opening as F35 if the panel doesn’t display it.

Permitted reset and access to the laundry

The support information consulted recommends unplugging the machine for at least two minutes and then turning it back on. Do this only using a dry, accessible outlet and following the procedure confirmed for your model.

If the message continues, request service. To retrieve laundry, Miele refers users to the emergency door release procedure in the appliance instructions; its location and mechanism vary. Before using it, make sure the specified conditions for water, temperature, disconnection and movement are met. If you can’t verify them, wait for a technician.

The guide to doors and locks explains these preliminary checks. Don’t insert tools beside the latch by following an image of another washer.

Tell us whether F35 appeared at the end of a cycle, when cancelling, or after a power outage.

View all articles in Miele washer error codes and messages