F20 or Heating fault on Miele: heating problem

F20 or Heating fault on a Miele affects heating. Thermostop may pause the timer until the target temperature is reached, but a persistent error needs to be checked.

Timer stopped or fault displayed

The manufacturer’s documentation explains that Thermostop keeps the cycle on hold if the program temperature has not yet been reached; the timer starts counting down again once it is reached. Note whether only the timer stops or F20/Heating fault appears explicitly.

Record the cycle, selected temperature, and stage at which it stops. The feel of the glass or the final temperature of the laundry alone does not indicate how the water heated during the wash.

A limited reset

For the technical fault, the support information consulted recommends disconnecting the appliance from the power supply, waiting at least two minutes, and selecting the cycle again. Do this only when you have safe, dry access to the electrical connection, and confirm that it applies to your model’s manual.

If the warning returns, stop trying to restart it and request service. Do not switch to cold washes to keep using an appliance with a persistent error, and do not take internal measurements or bypass thermostats. The guide to electricity and heating can help you describe related symptoms.

The diagnosis should confirm the cause of the heating problem; F20 does not mean that a specific heating element should be replaced.

View all articles in Miele washer error codes and messages