Miele F20 or Heating fault: heating problem

F20 or Heating fault on a Miele appliance affects heating. The Thermostop wait may pause the timer until the required temperature is reached, but a persistent error needs inspection.

Timer stopped or fault displayed

The manufacturer's documentation explains that Thermostop keeps the programme on hold when the selected temperature has not yet been reached; the countdown resumes once it is reached. Note whether only the timer stops or F20/Heating fault is displayed explicitly.

Record the programme, selected temperature and the stage at which it stops. The feel of the door glass or the final temperature of the clothes alone does not indicate how the water heated during the wash.

A limited reset

For a technical fault, the support information consulted advises disconnecting the appliance from the power supply, waiting for at least two minutes, and then selecting the programme again. Do this only when you can access the electrical connection safely and with dry hands, and confirm that the procedure applies to your model's manual.

If the warning returns, stop trying to restart it and request service. Do not switch to cold washes to keep using an appliance with a persistent error, and do not take internal measurements or bypass thermostats. The guide to electricity and heating helps describe related symptoms.

The diagnosis should confirm the cause of the heating problem; F20 does not indicate that a specific heating element must be replaced.

View all articles in Miele washing machine error codes and messages