On documented European Hotpoint models, F05 indicates a drainage blockage or a pump problem. Water may remain inside and the door may be locked.
Water trapped before retrieving laundry
The manufacturer’s documentation recommends checking the filter if the model has user access, as well as the hose and connections beneath the sink. Do not force the door, even if you need to remove items: first check the water level and carry out a safe drain.
Check for kinks in the hose and whether the household drain is also blocked. If the fault started after the appliance was installed, check the connection and height against the manual.
Only access the filter via the designated opening
Stop the machine and disconnect it safely; allow the water to cool and prepare a container. Use the gradual draining procedure described by Hotpoint before removing the filter. Clear any accessible debris and close it again to ensure a watertight seal. Cleaning the drain filter explains how to prepare.
If the drainage path is clear but F05 returns, request a service visit. There may be an internal fault, but the code and a pumping noise are not enough to identify a replacement pump. This table does not automatically apply to North American Hotpoint platforms.
Mention whether water remains inside and whether the door stays locked; both details describe the outcome of the draining process.
View all articles in Hotpoint washing machine error codes and warnings
