E8 error in Haier washing machines: excessive water level

E8 is an excessive water level alarm in the documented Haier washer-dryers. Do not start another fill to check it, or mistake a reset for a repair.

The Haier Appliances table refers this fault for servicing. The code identifies a water level condition, not the component responsible.

Prioritise water control

If the water level rises or a leak appears, stop using the machine and turn off the water supply if it is safe to do so. Do not force the door open while water remains inside. If there is moisture near electrical connections, avoid touching plugs or the casing and get help to isolate the appliance from a dry area.

Note whether water continued to enter after the programme was stopped and whether any water escaped from the appliance. Do not try to reproduce this by turning the tap on again.

An external inspection can help the service team, but it cannot distinguish between a valve, sensor and electronic fault. Do not blow through internal tubes or replace components by process of elimination. Even if the water level drops, arrange the appropriate inspection before using an overfilling machine again.

Provide the model reference and sequence of events so the technician can check both the filling and water level detection.

View all articles in Haier washing machine error codes and warnings