E1 indicates that the Haier washer-dryer has not drained within the time allowed by its control system. This interpretation does not apply to Err1, which is a door-related fault.
The Haier Appliances table documents E1 as a drainage fault. The table specifies four minutes for this detection on the washer-dryers described; this is not a limit that applies to all Haier models.
Check whether drainage is absent or only partial
Check the visible water and the external route of the hose. A crushed hose or blocked household outlet should be checked before buying parts. If the water drains slowly, make a note of it: some of the water disappearing does not prove that drainage is working properly.
Check how to access the filter and drain the water safely. Do not open the filter when the water is hot or while the washer-dryer is running. If there is no accessible procedure or you cannot collect the water, seek assistance.
If E1 persists after the permitted checks, the drainage circuit needs diagnosing. A humming noise does not confirm that the pump is working properly and is no reason to keep repeating programmes.
Keep the code as E1 when reporting the fault; do not add Err, as that distinction ensures the correct system is checked.
View all articles in Haier washing machine error codes and warnings
