Error EF0, EFO or EF3 on Electrolux washing machines: foam, leaks and protection

EF0/EFO on Electrolux machines may be accompanied by a leak, excessive foam or an unbalanced load. EF3 is identified as leak detection in the support information consulted.

Prioritise any water leak

The manufacturer’s documentation does not attribute this entire group of errors solely to detergent. If you see water leaking, stop using the machine and turn off the water supply. Avoid handling the plug if there is moisture or water around it.

Visually check the drawer, filter connection, hoses and door seal. A trapped item of clothing may prevent the seal from sitting correctly, but seeing one does not rule out other leaks. Do not tilt the washing machine to empty an internal tray.

If there is no visible leak

If there is a lot of foam, check the dosage and any products added, and follow the recovery time given in the manual. Clean the drawer only through the user-accessible opening if there is a build-up. If there is no foam but the laundry is bunched up, wait for the door to unlock normally and redistribute the load within the programme’s capacity.

Make a note of the condition you found. If the warning returns or you cannot locate the leak, request a diagnosis and provide the PNC and full error code. If the issue is limited to foam, see how to deal with excessive foam.

Do not run another cycle to check whether EF3 clears while water is still appearing.

View all articles in Electrolux washing machine error codes and warnings