E20/E21/C2 on Electrolux machines, or two beeps or flashes on compatible models, falls within the family of drainage problems. Note any additional subcode.
Installation, blockage or foam
The manufacturer’s documentation also lists E22, E23 and E24. Don’t automatically interpret them as different components that need replacing. Note whether water remains and whether the appliance attempts to pump it out.
Check for a kinked hose, insertion depth and height in accordance with the manual. If the hose connects to a siphon, check whether the household drain also backs up. If there is a lot of foam, note the dosage and products used, as these can make draining more difficult.
Before opening the maintenance access
Check that a user-accessible filter is available for your PNC. Stop and safely disconnect the appliance, allow the water to cool and follow the procedure for draining it gradually. Remove the filter only once the controlled draining has finished; clean it and refit it so that it seals properly.
See cleaning the pump filter to plan the preparation. If there is no authorised access or draining continues to fail, request assistance. Don’t try another wash with water still inside or force the door to retrieve clothes.
The pump making a noise does not confirm that the drain path is clear or that the flow rate is sufficient.
View all articles in Electrolux washing machine error codes and warnings
